![]() You can use a very small knife to separate the plunger from the keyboard. ![]() Try to remove it from the keyboard as clean as possible, so the bottom side of the plunger remains as flat as possible. Very carefully separate the silicone plunger from the donor keyboard. Inspect the bottom side of the key, make sure that holders are not damaged.Ĭarefully remove the key retainer from the donor keyboard. Remove the bottom key from the donor keyboard. Push on the button until it snaps on the retainer. Make sure the holders engage with the retainer. Seat the side with holders on the edges of the key fist. In my case the left side of the key cap should be seated properly. When you install the key cap on the retainer, make sure to seat the side with holders on the edges of the key fist. These holders secure the key cap to the retainer (hinge). ![]() Turn the key cap over and inspect small plastic key holders on the bottom side of the key.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |